################################################################################# # Version 1.0 $Revision: 1 $ # $Author: Mircea Hasegan $ # # Copyright © 1997 - 2007 by IXIA # All Rights Reserved. # # Revision Log: # 07-25-2007 Mircea Hasegan # ################################################################################# ################################################################################ # # # LEGAL NOTICE: # # ============== # # The following code and documentation (hereinafter "the script") is an # # example script for demonstration purposes only. # # The script is not a standard commercial product offered by Ixia and have # # been developed and is being provided for use only as indicated herein. The # # script [and all modifications, enhancements and updates thereto (whether # # made by Ixia and/or by the user and/or by a third party)] shall at all times # # remain the property of Ixia. # # # # Ixia does not warrant (i) that the functions contained in the script will # # meet the user's requirements or (ii) that the script will be without # # omissions or error-free. # # THE SCRIPT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, AND IXIA # # DISCLAIMS ALL WARRANTIES, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, # # INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR # # A PARTICULAR PURPOSE OR OF NON-INFRINGEMENT. # # THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SCRIPT IS WITH THE # # USER. # # IN NO EVENT SHALL IXIA BE LIABLE FOR ANY DAMAGES RESULTING FROM OR ARISING # # OUT OF THE USE OF, OR THE INABILITY TO USE THE SCRIPT OR ANY PART THEREOF, # # INCLUDING BUT NOT LIMITED TO ANY LOST PROFITS, LOST BUSINESS, LOST OR # # DAMAGED DATA OR SOFTWARE OR ANY INDIRECT, INCIDENTAL, PUNITIVE OR # # CONSEQUENTIAL DAMAGES, EVEN IF IXIA HAS BEEN ADVISED OF THE POSSIBILITY OF # # SUCH DAMAGES IN ADVANCE. # # Ixia will not be required to provide any software maintenance or support # # services of any kind (e.g., any error corrections) in connection with the # # script or any part thereof. The user acknowledges that although Ixia may # # from time to time and in its sole discretion provide maintenance or support # # services for the script, any such services are subject to the warranty and # # damages limitations set forth herein and will not obligate Ixia to provide # # any additional maintenance or support services. # # # ################################################################################ ################################################################################ # # # Description: # # This sample configures IPv4 and IPv6 interfaces on two ixia ports # # connected to a cisco dut. # # ARP and router solicitation is sent from all interfaces of both ixia # # ports. # # The following IPv4 interfaces should fail to resolve gateway ARP: # # Port1: Interface 3, Interface 4 # # Port2: Interface 9 # # The following IPv6 interfaces should fail to resolve router solicitation: # # Port2: Interface 6, Interface 8 # # # # Module: # # The sample was tested on a LM1000STXS4 module. # # # ################################################################################ ################################################################################ # DUT configuration: # # conf t # # ipv6 unicast-routing # ipv6 cef # # int gi 0/2 # ip address 101.101.101.1 255.255.255.0 # no ip route-cache cef # no ip route-cache # no ip mroute-cache # duplex full # ipv6 address 2002:5678:5678::1/64 # ipv6 enable # no shutdown # # int gi 0/3 # ip address 100.100.100.1 255.255.255.0 # no ip route-cache cef # no ip route-cache # no ip mroute-cache # duplex full # no shutdown # # end # ########################################################################### set env(IXIA_VERSION) HLTSET26 package require Ixia set test_name [info script] set chassisIP sylvester set port_list [list 3/3 3/4] # Connect to the chassis, reset to factory defaults and take ownership set connect_status [::ixia::connect \ -reset \ -device $chassisIP \ -port_list $port_list \ -username ixiaApiUser \ ] if {[keylget connect_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget connect_status log]" } set port_handle [list] foreach port $port_list { if {![catch {keylget connect_status port_handle.$chassisIP.$port} \ temp_port]} { lappend port_handle $temp_port } } set port1 [lindex $port_handle 0] set port2 [lindex $port_handle 1] puts "Ixia port handles are $port_handle ..." ################################################################################ # Configure Interface 1 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port1 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 101.101.101.110 \ -gateway 101.101.101.1 \ -netmask 255.255.255.0 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 2 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port1 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 101.101.101.111 \ -gateway 101.101.101.1 \ -netmask 255.255.255.0 \ -ipv6_intf_addr 2002:5678:5678::100\ -ipv6_prefix_length 64 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 3 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port1 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 101.101.101.112 \ -gateway 101.101.101.2 \ -netmask 255.255.255.0 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 4 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port1 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 101.101.101.113 \ -gateway 101.101.101.3 \ -netmask 255.255.255.0 \ -ipv6_intf_addr 2002:5678:5678::101 \ -ipv6_prefix_length 64 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 5 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port1 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -ipv6_intf_addr 2002:5678:5678::102 \ -ipv6_prefix_length 64 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 6 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port2 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 100.100.100.50 \ -gateway 100.100.100.1 \ -netmask 255.255.255.0 \ -ipv6_intf_addr 2001::4 \ -ipv6_prefix_length 64 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 7 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port2 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 100.100.100.51 \ -gateway 100.100.100.1 \ -netmask 255.255.255.0 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 8 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port2 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -ipv6_intf_addr 2001::5 \ -ipv6_prefix_length 64 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Configure Interface 9 ################################################################################ set interface_status [::ixia::interface_config \ -port_handle $port2 \ -mode config \ -speed ether100 \ -phy_mode copper \ -autonegotiation 1 \ -intf_ip_addr 100.100.100.52 \ -gateway 100.100.100.2 \ -netmask 255.255.255.0 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } ################################################################################ # Send ARP request ################################################################################ set interface_status [::ixia::interface_config \ -port_handle [list $port1 $port2] \ -arp_send_req 1 \ ] if {[keylget interface_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget interface_status log]" } foreach port $port_handle { puts "\nPort $port:" if {[keylget interface_status $port.arp_request_success] == 1} { puts "\tARP resolved for all interfaces" } else { if {![catch {keylget interface_status $port.arp_ipv4_interfaces_failed} out]} { puts "\tIPv4 Interfaces that failed to resolve ARP: $out" } if {![catch {keylget interface_status $port.arp_ipv6_interfaces_failed} out]} { puts "\tIPv6 Interfaces that didn't receive a response to router \ solicitation: $out" } } } set control_status [::ixia::cleanup_session -port_handle $port_handle] if {[keylget control_status status] != $::SUCCESS} { return "FAIL - $test_name - [keylget control_status log]" } return "SUCCESS - $test_name - [clock format [clock seconds]]"